Switching manufacturer energy contracts in Bundall, done in 20 days, no supply interruption
Manufacturer owners in Bundall usually find out at renewal that they've been paying 8–22% above market. We catch that earlier, and we switch you without disrupting supply or changing meters.
We're paid by the energy retailer when you switch, never by you.
Same-day quote turnaround for Bundall manufacturers. Same wires after the switch. Lower bill.
Manufacturers in Bundall, the energy snapshot
Bundall Road corporate offices and professional suites, they all run on the same Energex distribution network, but the retailers quoting them charge wildly different rates for the same kilowatt-hour.
Typical manufacturer usage profile
- Annual electricity: 250,000 kWh–2,000,000 kWh a year
- Peak demand: 100–600 kVA at the busiest 15-minute window
- Tariff that usually wins: Bid-tendered C&I, with capacity demand reservation review
Where Bundall manufacturers usually overpay
- capacity demand reserved for the line at full tilt, then paid for every month whether the line runs that hard or not
- a load factor that swings between shifts and shutdowns, priced off an annual average instead of what the meter actually did
- a renewal letter accepted every year because the plant is busy, and a busy plant never gets three bids on the table
Worked saving, Bundall manufacturer
Assumptions: SEQ light manufacturer, ~900 MWh/yr, three-bid tender via C&I panel. Your actual saving depends on your current contract and usage, we quote the real number.
What decides which retailer wins a Bundall manufacturer
No retailer gets a default answer from us. On a site like this one, these are the things we price against before anybody talks about a headline rate.
- ✓ Whether they will price the tariff this site actually needs: Bid-tendered C&I, with capacity demand reservation review.
- ✓ Whether they will bid at all at 250,000 kWh to 2,000,000 kWh a year. At this size the price comes off a tender against your interval data, not a rate card.
- ✓ Their demand rate, not just the c/kWh. At 100–600 kVA the demand charge can move the annual bill more than the energy rate does.
- ✓ The exit fee, the notice window, and the rollover rate you land on if nobody moves at the end of the term.
- ✓ Whether they will price every meter you run, or only want the big ones.
The whole point of having a panel is that no two manufacturers have the same best fit. We're paid by the energy retailer when you switch, never by you, and the commission is printed in c/kWh next to every offer. How we choose a retailer.
The honest objection-handler bit
If you're nervous about supply or downtime, this is the part we'd over-explain: switching retailers doesn't touch your meter, your network connection, or your supply. Same Energex network, same poles, same wires. Just a different name on the invoice.
What to do next
- Find your last electricity or gas bill (one page is fine).
- Upload it on this page, or email us direct.
- We come back same day with the comparison sheet.
- If the deal works, we send a Letter of Authority, sign it and we handle the switch.
Bundall manufacturer owner? Upload your bill
Drop your most recent electricity or gas bill. I'll come back with a real number for your Bundall site, usually same day.
- Send us one recent bill, or let us get it from your retailer.
- Sign a one page authority so we can ask retailers for prices.
- See every offer that comes back, with our commission on each one.
Takes about ninety seconds. Haven't got the bill handy? We will get it from your current retailer for you.
Manufacturer energy in Bundall, common questions
How exactly are Smarta Switch paid?
When we move your account to a new retailer, that retailer pays us a commission, partly upfront, partly as a trail over the life of the contract. We don't charge you a fee, mark up your rate, or add anything to your invoice. Ask us the exact dollar amount on any specific deal, we'll tell you.
Will my power get cut off when I switch?
No. Switching retailers doesn't touch the wires or your meter. Same poles, same wires, same network operator (Energex for nearly all SEQ). You just get a different name on your invoice, and a better number.
How long does a switch take?
Typical SEQ small-business switch: 10–20 business days from signing the Letter of Authority. We send the LoA, you sign, we lodge with the new retailer, they handle the meter-data hand-off with the network. Your old contract ends, the new one starts.
When should I renew my contract?
60–90 days before your current term ends. Don't let it roll over to default rates, those are usually 15–30% higher than what's available on the market. Send us your bill 60 days out and we'll re-quote.
Am I a C&I or SME customer?
Roughly: above 100 MWh/year electricity, you're commercial-and-industrial (C&I) and quotes come via tender from a different retailer panel. Below 100 MWh, you're SME and quoted off published rates. We figure out which side of the line you're on and quote to the right panel.
What does a C&I tender look like?
We collect your interval meter data, usually 12 months of it, package it as a request for bid, and put it to the retailers on our panel who can price a load of your size and shape. They bid against each other rather than against a rate card. You get an apples-to-apples comparison on a single sheet, with our commission shown in c/kWh next to every offer.
Read this next, plain-English guides
Three guides we'd send to any Bundall manufacturer owner before quoting. Same prose as we'd give over the phone.
How to choose a Brisbane commercial energy broker
The 7 criteria that separate a real broker from a marketing site, plus the 8 questions to ask anyone (including us) before you sign.
How to read a commercial electricity bill
Every line decoded, NMI, tariff, network, demand, GST. Plus the three lines retailers hope you don't ask about.
Why is my business power bill so high?
The 7 real reasons commercial bills run high, rolled-over rates, demand charges, the wrong tariff, and how to tell which one's hitting you.
Other Bundall industries we cover
Nearby suburbs, same manufacturer energy work
We're paid by the energy retailer when you switch, never by you.
When we move your account to a new retailer, that retailer pays us a commission, partly upfront, partly as a trail while you're with them. Your rate is your rate. There's no markup, no broker fee on your invoice, no monthly subscription.
We disclose the commission existence on every quote. If you want to know the exact dollar amount on a deal, ask. We'll tell you.
This is why we win on transparency: we'd rather show you the maths than dress up the savings.
Ready to see what Bundall manufacturers are actually paying?
Send us your bill, we'll come back with real numbers, not a sales call.